FORTE 1-877-730-1740
  • Home
  • SOOT REDUCTION
  • Retailers
  • Products
    • Forte Evaluation Procedures
    • Light-Duty Product Order Form
    • Heavy-Duty Product Order Form
    • Dangerous Goods Classification
  • DPF & EGR
  • LIGHT-DUTY
  • Contact
FORTE PRODUCTS IMPROVE FUEL ECONOMY
Picture
Picture
Picture

PART #s:    F009​​ (one liter bottle 12/CASE)      F034 (20 liter pail)      F029 (200 liter drum)

Picture
For information on how to flush injectors click here:
Picture
Picture
Picture
PART #s:    F005L​​ (one liter bottle 12/CASE)      F005P (20 liter pail)      F005D (200 liter drum)
Picture
Picture
Picture
Picture
PART #s:    F001L​​ (one liter bottle 12/CASE)      F001P (20 liter pail)      F001D (200 liter drum)
Picture
Picture
Picture
FORTE FUEL SYSTEM CLEANER™
PART #: F012L​ - 12/CASE

GASOLINE ENGINES ONLY
Picture
  • Injector Cleaner
  • Adds Lubricity
  • Removes Water
  • More Power
  • Better Fuel Economy
  • Crisper Throttle Response
  • Easier Cold Start
  • Less Engine Vibration
  • Reduces Engine Wear
  • Reduces Mechanical Failure
  • ​1 litre treats 200 litres of fuel
learn more
Picture

 FORTE DPF/EGR ATOMIZER FLUSH™
PART #:  DPF99​

Picture
The Forte Exhaust Atomizer™ induces a chemical solution through a port on the exhaust inlet side of the DPF/DOC, or into the EGR valve, effectively vaporizing soot from a plugged filter or EGR valve. This service does not require the removal of the DPF or the EGR valve, and does not add additional heat, vibration or stress of any kind to the equipment. Total service time is approximately 1.5 hours. This is a low‐cost, non‐invasive DPF and EGR cleaning method that can bring a plugged DPF or EGR valve back within new equipment specifications.
LEARN MORE
Picture

FORTE DIESEL INDUCTION AND EXHAUST CLEANER™
PART #: F020L​ - 12/CASE

​
USE WITH DPF99 ATOMIZER TOOL-DOES NOT HARM FUEL SYSTEM COMPONENTS

Picture
  • ​Use with DPF99 Atomizer tool ‐ does not harm fuel system components.
  • Safely cleans DPF and EGR valve / cooler back to OEM specifications.
  • Reduces exhaust backpressure.
  • When used in conjunction with Forte 6‐in‐1 Diesel Booster™, it will extend hours between DPF​ regen intervals.
  • When used in conjunction with Forte 6‐in‐1 Diesel Booster, it will reduce or eliminate EGR​ codes.
  • Extends the life of exhaust equipment.
LEARN MORE
Picture

FORTE DIESEL INDUCTION BUFFER AND FLUSHING AGENT™
PART #: F024 - 12/CASE​
​
USE WITH DPF99 ATOMIZER TOOL-DOES NOT HARM FUEL SYSTEM COMPONENTS

Picture
  • To be used after F024 to finish the cleaning process and neutralize pH balance in the DPF99​Atomizer and throughout the exhaust system.
LEARN MORE
Picture

FORTE DIFF AND GEAR TREATMENT™
PART #: F004L​ - 12/CASE

ADD TO CONVENTIONAL NON-SYNTHETIC DIFFERENTIAL FLUID


Picture
  • Add to conventional (non‐synthetic) differential fluid @ 30:1 or manual transmission @ 60:1
  • Strengthens sheer stability of diff fluid ‐ helps prevent sheering under high heat / high temps.
  • Improves lubricant adhesion under heavy loads.
  • Exceeds GL6 classification.
  • Reduces differential fluid operating temperature.
  • Reduces diff noise.
  • Lowers Diff Operating Temperatures by as much as 50°C
Picture
FORTE COMBUSTION CHAMBER CLEANER™
PART #:  003 - 28/CASE

(GASOLINE ENGINES ONLY - USED AS A FLUSH WITH THE T-33 EMMISION TOOL)​

Picture
  • Removes hard carbon deposits from intake valves.
  • Improves and balances compression.
  • Improves power and fuel economy.
  • Improves rough idle.
  • Recommended every 25,000 kms on gasoline engines only.
  • 325 ml can.
  • Feed into gasoline engine at 2200 rpm through a vacuum source using T-33 Emission tool.

Picture
FORTE COOLING SYSTEM FLUSH KIT™
2 PART KIT #: 93 - 14/CASE
2 PART KIT INCLUDES FLUSH (#F007) AND CONDITIONER (#F010) 

Picture
  • ​Add flush to old coolant prior to draining.
  • Run engine at operating temperature to circulate flush through open thermostat for 10 minutes.
  • Effectively removes rust, scale and silicate dropout.
  • Drain coolant and add F010 conditioner to neutralize flush, lubricate water pump and balance pH.
  • Safe for regular or long‐life coolant.
Picture

​  FORTE POWER STEERING FLUSH KIT™ 
2 PART KIT #: 92 - 6/CASE
2 PART KIT INCLUDES RACK AND PINION CLEANER (PART# - 40A) AND SYNTHETIC FLUID (PART# - 41C)

Picture
  • Remove enough fluid to add Rack & Pinion Cleaner.
  • Work steering back and forth for 5 minutes for flush to circulate throughout system.
  • Evacuate old fluid and install new Forte Synthetic Fluid.
  • Reduces or eliminates Power Steering noise and smoothens operation.
  • Improves fluid performance in extreme heat or cold temperatures.
Picture

FORTE AUTOMATIC TRANSMISSION & SEAL CONDITIONER™  
PART #:  006 - 28/CASE
AUTOMATIC T
RANSMISSION FLUID, POWER STEERING FLUID OR ENGINE OIL

Picture
  • Reduces or eliminates fluid leaks in automatic transmission, power steering or engine rear main seal.
  • Improves shifting characteristics and transmission shudder.
  • Exceeds Ford, GM & Chrysler specifications.
  • Improves transmission fluid performance under heavy loads.
  • Lowers cold temperature pour‐point ‐ lubricates better in extreme cold.
  • Restores additive package in transmission fluid trapped in torque converter.
Picture

FORTE AIR INTAKE CLEANER™
PART #:  36A​ - 12/CASE

Picture
  • 98gram one job size can
  • Spray throttle body prior to emission service.​
Picture

FORTE INSTANT LUBRICANT™
PART #:  F100​ - 12/CASE

Picture
  • 350 gram ‐ 12/case
  • Superior spray lubricant​ and rust penetrant.
  • Home
  • SOOT REDUCTION
  • Retailers
  • Products
    • Forte Evaluation Procedures
    • Light-Duty Product Order Form
    • Heavy-Duty Product Order Form
    • Dangerous Goods Classification
  • DPF & EGR
  • LIGHT-DUTY
  • Contact